New Generation Silicone-Based Defoamer: Maxant Clear

As Latro Kimya, we are initiating a new era with next-generation silicone-based foam control agents; we deliver advanced solutions to foam problems in systems with the most effective silicone-based foam control agents. Foam control agents differ in the effects we expect based on the process we apply. In non-continuous, batch systems, we can solve the foam problem with instant foam control effect. In such cases, we benefit from the foam control agent's initial knock-down property. In continuous processes, instant foam control effect and durability are important. In continuous systems, the durability of the foam control agent should be evaluated considering the working principle of the system. Otherwise, the system will need to be fed again. Our other expectations are high system compatibility and the ability to feed into the system. At this point, we should note that a significant problem in many sectors is stability issues created in the system by foam control agents that are not compatible with the system. Another frequently encountered problem is the difficulty in use of concentrated, high-viscosity foam control agents by end consumers. Products can be described as unusable due to both their viscosities and deficiencies in automation systems. With various dilution formulations, we can bring these products to a deconcentrated state and prepare them for final use. However, making these foam control agents into a storable, stable emulsion may not be possible in every system. At the same time, adverse effects on product performance can also occur. As Latro Kimya, we solve problems in silicone-based foam control agent systems. Our next-generation silicone-based foam control agent emulsion Maxant Clear is suitable for use in almost any system with ease of feeding in the process. With wetting and surfactant combinations, particularly in concentrated nonionic and anionic-nonionic series wetting agents, we provide solutions with our foam control agent Maxant Clear, which does not cloud the system and shows high compatibility with the system. Depending on the process you apply, Maxant Clear is a silicone-based foam control agent emulsion that can be used at ratios of 0.1 to 5 percent in the system, with initial foam control effect in the foreground and at the same time high durability. One of its most important features is that it shows high compatibility by keeping the system completely clear. We all complained about stability problems when using foam control agents incompatible with the system, as we could not feed the system at high ratios due to stability issues. But with Maxant Clear, we are welcoming a new era of foam control agents. We can feed at high ratios to obtain the desired effect. As a result of field work with our technical sales engineers and work conducted in our Wonderlab Istanbul Laboratory, Maxant Clear has been presented to you after durability in the circulation system has been tested for 20 minutes, considering continuous processes. If you want to find solutions to your problems with a foam control agent that is compatible with textile, paints, wastewater treatment, agriculture, coatings, inks, chemical processes and paper systems, with effective initial foam control and very good durability, you are in the right place: Latro Kimya; reach the pleasant address of chemistry, let us solve your problems with Maxant Clear. Ebru Pars / Technical Sales Manager / Latro Kimya